The Flp Microsatellite Platform

Download or read book The FLP Microsatellite Platform written by Jens Eickhoff and published by Springer. This book was released on 2015-12-10 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the Flight Operations Manual for a reusable microsatellite platform – the “Future Low-cost Platform” (FLP), developed at the University of Stuttgart, Germany. It provides a basic insight on the onboard software functions, the core data handling system and on the power, communications, attitude control and thermal subsystem of the platform. Onboard failure detection, isolation and recovery functions are treated in detail. The platform is suited for satellites in the 50-150 kg class and is baseline of the microsatellite “Flying Laptop” from the University. The book covers the essential information for ground operators to controls an FLP-based satellite applying international command and control standards (CCSDS and ECSS PUS). Furthermore it provides an overview on the Flight Control Center in Stuttgart and on the link to the German Space Agency DLR Ground Station which is used for early mission phases. Flight procedure and mission planning chapters complement the book.

Download or read book Space Operations written by Craig Cruzen and published by Springer Nature. This book was released on 2022-03-15 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a selection of reviewed and enhanced contributions presented at the SpaceOps 2021, the 16th International Conference on Space Operations, held virtually in May 2021. The chapter selections were made based upon their relevance to the current space operations community. The contributions represent a cross-section of three main subject areas: Mission Management – management tasks for designing, preparing and operating a particular mission; Spacecraft Operations – preparation and implementation of all activities to operate a space vehicle (crewed and uncrewed) under all conditions; and Ground Operations – preparation, qualification, and operations of a mission dedicated ground segment and appropriate infrastructure including antennas, control centers, and communication means and interfaces. The book promotes the SpaceOps Committee’s mission to foster the technical interchange on all aspects of space mission operations and ground data systems while promoting and maintaining an international community of space operations experts.

Download or read book A Combined Data and Power Management Infrastructure written by Jens Eickhoff and published by Springer Nature. This book was released on 2022-02-10 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development and design of a unique combined data and power management infrastructure for small satellites. This new edition became necessary because in the frame of the system's impressive evolution from an academic prototype to one of today's most advanced core avionics, many elements were upgraded to their next technology generation and diverse new components complement the upgraded design. All elements are presented in updated respectively new chapters. This modular infrastructure was selected by the Swiss start-up ClearSpace SA for ESA's first mission ClearSpace-1 to remove space debris. Furthermore it is the baseline for the Thai national satellite development program and is used by an increasing number of universities worldwide for research studies.

Download or read book Onboard Computers, Onboard Software and Satellite Operations written by Jens Eickhoff and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a system engineer's compendium, explaining the dependencies and technical interactions between the onboard computer hardware, the onboard software and the spacecraft operations from ground. After a brief introduction on the subsequent development in all three fields over the spacecraft engineering phases each of the main topis is treated in depth in a separate part. The features of today’s onboard computers are explained at hand of their historic evolution over the decades from the early days of spaceflight up to today. Latest system-on-chip processor architectures are treated as well as all onboard computer major components. After the onboard computer hardware the corresponding software is treated in a separate part. Both the software static architecture as well as the dynamic architecture are covered, and development technologies as well as software verification approaches are included. Following these two parts on the onboard architecture, the last part covers the concepts of spacecraft operations from ground. This includes the nominal operations concepts, the redundancy concept and the topic of failure detection, isolation and recovery. The baseline examples in the book are taken from the domain of satellites and deep space probes. The principles and many cited standards on spacecraft commanding, hardware and software however also apply to other space applications like launchers. The book is equally applicable for students as well for system engineers in space industry.

Download or read book Fundamental Concepts of Liquid-Propellant Rocket Engines written by Alessandro de Iaco Veris and published by Springer Nature. This book was released on 2020-09-26 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for students and engineers who design and develop liquid-propellant rocket engines, offering them a guide to the theory and practice alike. It first presents the fundamental concepts (the generation of thrust, the gas flow through the combustion chamber and the nozzle, the liquid propellants used, and the combustion process) and then qualitatively and quantitatively describes the principal components involved (the combustion chamber, nozzle, feed systems, control systems, valves, propellant tanks, and interconnecting elements). The book includes extensive data on existing engines, typical values for design parameters, and worked-out examples of how the concepts discussed can be applied, helping readers integrate them in their own work. Detailed bibliographical references (including books, articles, and items from the “gray literature”) are provided at the end of each chapter, together with information on valuable resources that can be found online. Given its scope, the book will be of particular interest to undergraduate and graduate students of aerospace engineering.

Download or read book Forensic DNA Typing: Principles, Applications and Advancements written by Pankaj Shrivastava and published by Springer Nature. This book was released on 2020-12-11 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the fundamental principles, advances in forensic techniques, and its application on forensic DNA analysis. The book is divided into three modules; the first module provides the historical prospect of forensic DNA typing and introduces fundamentals of forensic DNA typing, methodology, and technical advancements, application of STRs, and DNA databases for forensic DNA profile analysis. Module 2 examines the problems and challenges encountered in extracting DNA and generating DNA profiles. It provides information on the methods and the best practices for DNA isolation from forensic biological samples and human remains like ancient DNA, DNA typing of skeletal remains and disaster victim identification, the importance of DNA typing in human trafficking, and various problems associated with capillary electrophoresis. Module 3 emphasizes various technologies that are based on SNPs, STRs namely Y-STR, X-STR, mitochondrial DNA profiling in forensic science. Module 4 explores the application of non-human forensic DNA typing of domestic animals, wildlife forensics, plant DNA fingerprinting, and microbial forensics. The last module discusses new areas and alternative methods in forensic DNA typing, including Next-Generation Sequencing, and its utility in forensic science, oral microbes, and forensic DNA phenotyping. Given its scope, the book is a useful resource in the field of DNA fingerprinting for scientists, forensic experts, and students at the postgraduate level.

Download or read book Genome Mapping and Genomics in Animal-Associated Microbes written by Vishvanath Nene and published by Springer Science & Business Media. This book was released on 2008-11-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achievements and progress in genome mapping and the genomics of microbes supersede by far those for higher plants and animals, in part due to their enormous economic implication but also smaller genome size. In the post-genomic era, whole genome sequences of animal-associated microbes are providing clues to depicting the genetic basis of the complex host-pathogen relationships and the evolution of parasitism; and to improving methods of controlling pathogens. This volume focuses on a globally important group of intracellular prokaryotic pathogens which affect livestock animals. These include Brucella, Mycobacterium, Anaplasma and Ehrlichia, as well as the protozoan pathogens Cryptosporidium and Theileria, for which genome sequence data is available. Insights from comparative genomics of the microbes described provide clues to the adaptation involved in host-microbe interactions, as well as resources potentially useful for application in future research and product development.