Model Based System And Architecture Engineering With The Arcadia Method

Download or read book Model-based System and Architecture Engineering with the Arcadia Method written by Jean-Luc Voirin and published by Elsevier. This book was released on 2017-11-22 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arcadia is a system engineering method based on the use of models, with a focus on the collaborative definition, evaluation and exploitation of its architecture. This book describes the fundamentals of the method and its contribution to engineering issues such as requirements management, product line, system supervision, and integration, verification and validation (IVV). It provides a reference for the modeling language defined by Arcadia. The author discusses the range of applications, from the assessment of different architectures and their suitability, to the collaboration between system engineering, specialties such as safety or security, subsystems engineering teams, software and hardware. This is illustrated by several examples of representative models which constitute a common thread. - Offers a comprehensive examination of systems engineering, including the use of models to support it - Not only yet another book on modeling, but rather a journey in systems engineering, enlightening the use of models to support it. - Focuses on solitary modeling tasks while also covering prime collaborations between engineering stakeholders - Examines modeling techniques to capture and share architecture and to early verify it against need and non-functional constraints - Addresses subjects not usually covered by model-based system engineering (MBSE) methods, such as co-engineering with specialties, system/sub-system co-engineering, integration verification and validation - Features a powerful, dedicated tool (Capella) - Covers a range of topics, including an introduction to system engineering issues, an introduction to MBSE, a presentation of the method for beginners and a handy reference manual for advanced users

Download or read book Systems Architecture Modeling with the Arcadia Method written by Pascal Roques and published by Elsevier. This book was released on 2017-11-22 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Architecture Modeling with the Arcadia Method is an illustrative guide for the understanding and implementation of model-based systems and architecture engineering with the Arcadia method, using Capella, a new open-source solution. More than just another systems modeling tool, Capella is a comprehensive and extensible Eclipse application that has been successfully deployed in a wide variety of industrial contexts. Based on a graphical modeling workbench, it provides systems architects with rich methodological guidance using the Arcadia method and modeling language. Intuitive model editing and advanced viewing capabilities improve modeling quality and productivity, and help engineers focus on the design of the system and its architecture. This book is the first to help readers discover the richness of the Capella solution. - Describes the tooled implementation of the Arcadia method - Highlights the toolset widely deployed on operational projects in all Thales domains worldwide (defense, aerospace, transportation, etc.) - Emphasizes the author's pedagogical experience on the methods and the tools gained through conducting more than 80 training sessions for a thousand engineers at Thales University - Examines the emergence of an ecosystem of organizations, including industries that would drive the Capella roadmap according to operational needs, service and technology suppliers who would develop their business around the solution, and academics who would pave the future of the engineering ecosystem

Download or read book Systems Engineering for Automotive Powertrain Development written by Hannes Hick and published by Springer. This book was released on 2021-02-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last century, the automotive industry has been dominated by internal combustion engines. Their flexibility of application, driving range, performance and sporty characteristics has resulted in several generations of this technology and has formed generations of engineers. But that is not the end of the story. Stricter legislation and increased environmental awareness have resulted in the development of new powertrain technologies in addition and parallel to the highly optimized internal combustion engine. Hybrid powertrains systems, pure battery electric systems and fuel cell systems, in conjunction with a diverse range of applications, have increased the spectrum of powertrain technologies. Furthermore, automated driving together with intelligent and highly connected systems are changing the way to get from A to B. Not only is the interaction of all these new technologies challenging, but also several different disciplines have to collaborate intensively in order for new powertrain systems to be successfully developed. These new technologies and the resulting challenges lead to an increase in system complexity. Approaches such as systems engineering are necessary to manage this complexity. To show how systems engineering manages the increasing complexity of modern powertrain systems, by providing processes, methods, organizational aspects and tools, this book has been structured into five parts. Starting with Challenges for Powertrain Development, which describes automotive-related challenges at different levels of the system hierarchy and from different point of views. The book then continues with the core part, Systems Engineering, in which all the basics of systems engineering, model-based systems engineering, and their related processes, methods, tools, and organizational matters are described. A special focus is placed on important standards and the human factor. The third part, Automotive Powertrain Systems Engineering Approach, puts the fundamentals of systems engineering into practice by adding the automotive context. This part focuses on system development and also considers the interactions to hardware and software development. Several approaches and methods are presented based on systems engineering philosophy. Part four, Powertrain Development Case Studies, adds the practical point of view by providing a range of case studies on powertrain system level and on powertrain element level and discusses the development of hybrid powertrain, internal combustion engines, e-drives, transmissions, batteries and fuel cell systems. Two case studies on a vehicle level are also presented. The final part, Outlook, considers the development of systems engineering itself with particular focus on information communication technologies. Even though this book covers systems engineering from an automotive perspective, many of the challenges, fundamental principles, conclusions and outlooks can be applied to other domains too. Therefore, this book is not only relevant for automotive engineers and students, but also for specialists in scientific and industrial positions in other domains and anyone who has to cope with the challenge of successfully developing complex systems with a large number of collaborating disciplines.

Download or read book Foundations for Model-based Systems Engineering written by Jon Holt and published by IET. This book was released on 2016-05-31 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practice of Model-Based Systems Engineering (MBSE) is becoming more widely adopted in industry, academia and commerce; as the use of modelling matures in the real world, so the need increases for more guidance on how to model effectively and efficiently. This practical book describes a number of systems-level "patterns" that may be applied using the systems modelling language SysML for the development of any number of different applications and as the foundations for a system model. This is a companion volume to both SysML for Systems Engineering: A Model-Based Approach and Model-based Requirements Engineering, both published by the IET. Whereas the previous volumes presented the case for modelling and provided an indepth overview of SysML, this book focuses on a set of "patterns" as the basis of an MBSE model and their use in today's systems engineering community. Topics covered include an introduction to MBSE concepts, ontology and frameworks; what is a pattern?; interface definition pattern; traceability pattern; test case pattern; epoch/measurement pattern; life cycle pattern; evidence pattern; description pattern; context pattern; analysis risk pattern; requirements engineering - ACRE; system of systems requirements - SoS-ACRE; process modelling - '7 views'; competency modelling; life cycle management; project information modelling; model maturity levels; technology readiness levels; defi ning the patterns; using patterns for model assessment, model definition, and model retro-fitting. Foundations for Model-Based Systems Engineering is essential reading for researchers and students of systems modelling in academia, as well as systems engineers, requirements engineers, software engineers, systems managers, requirements managers, and systems modelers in industry.

Download or read book Model-Based Systems Engineering with OPM and SysML written by Dov Dori and published by Springer. This book was released on 2016-06-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Based Systems Engineering (MBSE), which tackles architecting and design of complex systems through the use of formal models, is emerging as the most critical component of systems engineering. This textbook specifies the two leading conceptual modeling languages, OPM—the new ISO 19450, composed primarily by the author of this book, and OMG SysML. It provides essential insights into a domain-independent, discipline-crossing methodology of developing or researching complex systems of any conceivable kind and size. Combining theory with a host of industrial, biological, and daily life examples, the book explains principles and provides guidelines for architecting complex, multidisciplinary systems, making it an indispensable resource for systems architects and designers, engineers of any discipline, executives at all levels, project managers, IT professional, systems scientists, and engineering students.

Download or read book Decision Making in Systems Engineering and Management written by Gregory S. Parnell and published by John Wiley & Sons. This book was released on 2011-03-16 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision Making in Systems Engineering and Management is a comprehensive textbook that provides a logical process and analytical techniques for fact-based decision making for the most challenging systems problems. Grounded in systems thinking and based on sound systems engineering principles, the systems decisions process (SDP) leverages multiple objective decision analysis, multiple attribute value theory, and value-focused thinking to define the problem, measure stakeholder value, design creative solutions, explore the decision trade off space in the presence of uncertainty, and structure successful solution implementation. In addition to classical systems engineering problems, this approach has been successfully applied to a wide range of challenges including personnel recruiting, retention, and management; strategic policy analysis; facilities design and management; resource allocation; information assurance; security systems design; and other settings whose structure can be conceptualized as a system.

Download or read book Object-Process Methodology written by Dov Dori and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Object-Process Methodology (OPM) is an intuitive approach to systems engineering. This book presents the theory and practice of OPM with examples from various industry segments and engineering disciplines, as well as daily life. OPM is a generic, domain independent approach that is applicable almost anywhere in systems engineering.