Microwave Mixer Technology And Applications

Download or read book Microwave Mixer Technology and Applications written by Bert Henderson and published by Artech House. This book was released on 2013-08-01 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although microwave mixers play a critical role in wireless communication and other microwave applications employing frequency conversion circuits, engineers find that most books on this subject emphasize theoretical aspects, rather than practical applications. That’s about to change with the forthcoming release of Microwave Mixer Technology and Applications. Based on a review of over one thousand patents on mixers and frequency conversion, authors Bert Henderson and Edmar Camargo have written a comprehensive book for mixer designers who want solid ideas for solving their own design challenges. Many of the important and most interesting patents and related circuits are discussed in the several application oriented chapters. In addition, important contributions from the technical literature are included to provide a solid theoretical foundation. This book contains both introductory and advanced material about active and passive mixers that use bipolar transistor, FET, or diode switching devices. Theory and design details are presented for dozens of important mixer designs, with practical application information derived from the authors’ decades of experience.

Download or read book Microwave Mixers written by Stephen A. Maas and published by Artech House Microwave Library. This book was released on 1993 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to fundamental mixer types, as well as variations on the classical mixer designs.

Download or read book Microwave and Millimetre-Wave Design for Wireless Communications written by Ian Robertson and published by John Wiley & Sons. This book was released on 2016-06-20 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a full range of contemporary techniques for the design of transmitters and receivers for communications systems operating in the range from 1 through to 300 GHz. In this frequency range there is a wide range of technologies that need to be employed, with silicon ICs at the core but, compared with other electronics systems, a much greater use of more specialist devices and components for high performance – for example, high Q-factor/low loss and good power efficiency. Many text books do, of course, cover these topics but what makes this book timely is the rapid adoption of millimetre-waves (frequencies from 30 to 300 GHz) for a wide range of consumer applications such as wireless high definition TV, “5G” Gigabit mobile internet systems and automotive radars. It has taken many years to develop low-cost technologies for suitable transmitters and receivers, so previously these frequencies have been employed only in expensive military and space applications. The book will cover these modern technologies, with the follow topics covered; transmitters and receivers, lumped element filters, tranmission lines and S-parameters, RF MEMS, RFICs and MMICs, and many others. In addition, the book includes extensive line diagrams to illustrate circuit diagrams and block diagrams of systems, including diagrams and photographs showing how circuits are implemented practically. Furthermore, case studies are also included to explain the salient features of a range of important wireless communications systems. The book is accompanied with suitable design examples and exercises based on the Advanced Design System – the industry leading CAD tool for wireless design. More importantly, the authors have been working with Keysight Technologies on a learning & teaching initiative which is designed to promote access to industry-standard EDA tools such as ADS. Through its University Educational Support Program, Keysight offers students the opportunity to request a student license, backed up with extensive classroom materials and support resources. This culminates with students having the chance to demonstrate their RF/MW design and measurement expertise through the Keysight RF & Microwave Industry-Ready Student Certification Program. www.keysight.com/find/eesof-university www.keysight.com/find/eesof-student-certification

Download or read book Frequency Measurement Technology written by Ignacio Llamas-Garro and published by Artech House. This book was released on 2017-12-31 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique first-of-its-kind resource provides practical coverage of the design and implementation of frequency measurement receivers, which aid in identifying unknown signals. The technologies used in frequency measurement interferometry-based on-delay lines and filters are explored in this book. Practitioners also find concrete examples of microwave photonics implementations. The designs and concepts that cover conventional photonic instantaneous frequency measurement (IFM) circuits are explained. This book provides details on new designs for microwave photonic circuits and reconfigurable frequency measurement (RFM) circuits using diodes and MicroElectroMechanical Systems (MEMS). This book explains the many diverse applications of frequency measurement that are used in defense, radar, and communications. The instrumentation used to perform frequency measurements is explained, including the use of block analysis for network and spectrum analyzers and calibration techniques. Readers learn the advantages of using frequency measurement based on microwave/RF techniques, including immunity to electromagnetic interference, low loss, compatibility with fiber signal distribution, and parallel processing signals. Moreover, readers gain insight into the future of frequency measurement receivers. The book examines both the underpinnings and the implementation of frequency measurement receivers using many diverse technological platforms.

Download or read book Wideband Microwave Materials Characterization written by John W. Schultz and published by Artech House. This book was released on 2023-02-28 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical engineering guide to microwave material measurements for both laboratory and manufacturing/field environments, including nondestructive inspection (NDI) and nondestructive evaluation (NDE). The book covers proven methods for characterizing materials at microwave frequencies, including both resonant and wide-bandwidth techniques, and gives you the necessary theory and equations for implementing these methods. You’ll understand how to invert dielectric and/or magnetic material properties from free space transmission and reflection, and how to measure traveling wave attenuation. You’ll also know how to measure dielectric and/or magnetic material properties from transmission line fixtures, and learn how to use computational electromagnetic modeling with a measurement fixture. The book shows you how to build and use microwave NDE equipment for radomes and/or structural dielectric materials. This is an excellent resource for Engineers/scientists conducting or analyzing RF/Microwave/MMW material measurements for applications in electromagnetic materials, as well as those who are developing or applying microwave non-destructive evaluation (NDE) methods to their manufacturing problems.

Download or read book Nonlinear Design: FETs and HEMTs written by Peter H. Ladbrooke and published by Artech House. This book was released on 2021-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its continuing popularity, the so-called standard circuit model of compound semiconductor field-effect transistors (FETs) and high electron mobility transistors (HEMTs) is shown to have a limitation for nonlinear analysis and design: it is valid only in the static limit. When the voltages and currents are time-varying, as they must be for these devices to have any practical use, the model progressively fails for higher specification circuits. This book shows how to reform the standard model to render it fully compliant with the way FETs and HEMTs actually function, thus rendering it valid dynamically. Proof-of-principle is demonstrated for several practical circuits, including a frequency doubler and amplifiers with demanding performance criteria. Methods for extracting both the reformulated model and the standard model are described, including a scheme for re-constructing from S-parameters the bias-dependent dynamic (or RF) I(V) characteristics along which devices work in real-world applications, and as needed for the design of nonlinear circuits using harmonic-balance and time-domain simulators. The book includes a historical review of how variations on the standard model theme evolved, leading up to one of the most widely used—the Angelov (or Chalmers) model.

Download or read book Millimeter-Wave GaN Power Amplifier Design written by Edmar Camargo and published by Artech House. This book was released on 2022-05-31 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives you – in one comprehensive and practical resource -- everything you need to successfully design modern and sophisticated power amplifiers at mmWave frequencies. The book provides an in-depth treatment of the design methodology for MMIC power amplifiers, then brings you step by step through the various phases of design, from the selection of technology and preliminary architecture considerations, to the effective design of the matching circuits and conversion of electrical-to-electromagnetic models. Detailed figures and numerous practical applications are included to help you gain valuable insights into these technologies and learn to identify the best path to a successful design. You’ll be guided through a range of new mmWave power applications that show particular promise to support new 5G systems, while mastering the use of GaN technology that continues to dominate the power mmWave applications due to its high power, gain, and efficiency. This is a valuable resource for power amplifier design engineers, technicians, industry R&D staff, and anyone getting into the area of power MMICs who wants to learn how to design at mmWave frequencies.