Exchange Comparison Two Real Time Operating Systems On A Micro Controller System

Download or read book Exchange & Comparison Two Real Time Operating Systems on a Micro-Controller System written by Junyi Xu and published by diplom.de. This book was released on 2014-04-11 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Abstract: Embedded systems are becoming an integral part of commercial products today. Mobile phones, watches, cars and flights controllers etc. are to name a few. There are critical elements between the system hardware and the software, one of the primary is the Real Time Operating System which ensures control, compatibility and timing. The Real Time Operating System has to interface/communicate well with the hardware below it to prevent casualty, and with the software above to ensure the applications running in a proper way. Therefore, more and more attention is being paid to the porting relationship between Real Time Operating System and Application Software by engineers in embedded field. Comparing and evaluating the performance of different Real Time Operating Systems is getting more important. Measuring is the only way to provide useful information, for example, which Real Time Operating System is best suitable for a specific hardware configuration. The purpose of this thesis paper is to find an approach to exchange MicroC/OS-II with NOKIA Car-kit OS on a micro-controller system. Besides porting MicroC/OS-II to the micro-controller system, the interfaces to higher level application software should be generated to adapt the application software to MicroC/OS-II. Finally, evaluate the advantages and disadvantages of them. In chapter 1, a brief introduction is provided. In chapter 2, the concept of RTOS and the development of Real Time Kernel are introduced. The field on which RTOS is always focusing and why RTOS is especially important in Embedded Systems are explained. The essential performance and the differences among several RTOS are also discussed in this chapter. In chapter 3, the micro Real Time Kernel MicroC/OS-II is introduced in details. The speciality of MicroC/OS-II and the services provided from MicroC/OS-II are explained. Also, the micro-controllers that MicroC/OS-II supported are introduced. In chapter 4, NOKIA Car-kit OS (NOKIA Car-kit Operating System) is introduced. The development history and some of important service mechanism are introduced briefly. In chapter 5, the evaluation and comparison of these two Operating Systems are made. The most important characteristics, the advantages and disadvantages for both of these two RTOS are discussed. In chapter 6, the software-mapping layer is discussed in detail. In this part, the whole software development procedure is explained. Issues from problem analyse, [...]

Download or read book Real-Time Concepts for Embedded Systems written by Qing Li and published by CRC Press. This book was released on 2003-01-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: '... a very good balance between the theory and practice of real-time embedded system designs.' —Jun-ichiro itojun Hagino, Ph.D., Research Laboratory, Internet Initiative Japan Inc., IETF IPv6 Operations Working Group (v6ops) co-chair 'A cl

Download or read book Cyber-Physical Systems and Control II written by Dmitry G. Arseniev and published by Springer Nature. This book was released on 2023-01-20 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains selected research papers presented at the 2nd International Conference on Cyber-Physical Systems and Control (CPS&C’2021) which was held from 29 June to 2 July 2021 in St. Petersburg, Russia. The CPS&C’2021 Conference continues the series of international conferences that began in 2019 when the first International Conference on Cyber-Physical Systems and Control (CPS&C’2019) took place. Cyber-physical systems (CPSs) considered a modern and rapidly emerging generation of systems with integrated wide computational, information processing, and physical capabilities that can interact with humans through many new modalities and application areas of implementation. The book covers the latest advances, developments and achievements in new theories, algorithms, models, and applications of prospective problems associated with CPSs with an emphasis on control theory and related areas. The multidisciplinary fundamental scientific and engineering principles that underpin the integration of cyber and physical elements across all application areas are discussed in the book chapters. The materials of the book may be of interest to scientists and engineers working in the field of cyber-physical systems, systems analysis, control systems, computer technologies, and similar fields.

Download or read book Proceedings of the Nat'l Symposium written by and published by Allied Publishers. This book was released on with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Internet of Things written by Fatima Hussain and published by Springer. This book was released on 2017-03-27 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the building blocks and introductory business models for Internet of Things (IoT). The author provide an overview of the entire IoT architecture and constituent layers, followed by detail description of each block . Various inter-connecting technologies and sensors are discussed in context of IoT networks. In addition to this, concepts of Big Data and Fog Computing are presented and characterized as per data generated by versatile IoT applications . Smart parking system and context aware services are presented as an hybrid model of cloud and Fog Afterwards, various IoT applications and respective business models are discussed. Finally, author summarizes the IoT building blocks and identify research issues in each, and suggest potential research projects worthy of pursuing.

Download or read book Hands-On RTOS with Microcontrollers written by Brian Amos and published by Packt Publishing Ltd. This book was released on 2020-05-15 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a strong foundation in designing and implementing real-time systems with the help of practical examples Key Features Get up and running with the fundamentals of RTOS and apply them on STM32 Enhance your programming skills to design and build real-world embedded systems Get to grips with advanced techniques for implementing embedded systems Book DescriptionA real-time operating system (RTOS) is used to develop systems that respond to events within strict timelines. Real-time embedded systems have applications in various industries, from automotive and aerospace through to laboratory test equipment and consumer electronics. These systems provide consistent and reliable timing and are designed to run without intervention for years. This microcontrollers book starts by introducing you to the concept of RTOS and compares some other alternative methods for achieving real-time performance. Once you've understood the fundamentals, such as tasks, queues, mutexes, and semaphores, you'll learn what to look for when selecting a microcontroller and development environment. By working through examples that use an STM32F7 Nucleo board, the STM32CubeIDE, and SEGGER debug tools, including SEGGER J-Link, Ozone, and SystemView, you'll gain an understanding of preemptive scheduling policies and task communication. The book will then help you develop highly efficient low-level drivers and analyze their real-time performance and CPU utilization. Finally, you'll cover tips for troubleshooting and be able to take your new-found skills to the next level. By the end of this book, you'll have built on your embedded system skills and will be able to create real-time systems using microcontrollers and FreeRTOS.What you will learn Understand when to use an RTOS for a project Explore RTOS concepts such as tasks, mutexes, semaphores, and queues Discover different microcontroller units (MCUs) and choose the best one for your project Evaluate and select the best IDE and middleware stack for your project Use professional-grade tools for analyzing and debugging your application Get FreeRTOS-based applications up and running on an STM32 board Who this book is for This book is for embedded engineers, students, or anyone interested in learning the complete RTOS feature set with embedded devices. A basic understanding of the C programming language and embedded systems or microcontrollers will be helpful.

Download or read book Safety for Future Transport and Mobility written by Hans-Leo Ross and published by Springer Nature. This book was released on 2020-09-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides background information about technical solutions, processes and methodology to develop future automated mobility solutions. Beginning from the legal requirements as the minimum tolerable risk level of the society, the book provides state-of-the-art risk-management methodologies. The system engineering approach based on todays engineering best practices enhanced by principles derived from cybernetics. The approach derived from the typical behaviour of a human driver in public road traffic to a cybernetical based system engineering approach. Beyond the system engineering approach, a common behaviour model for the operational domain will show aspects how to extend the system engineering model with principles of cybernetics. The role and the human factors of road traffic participants and drivers of motor vehicles are identified and several viewpoints for different observers show how such mixed traffic scenarios could be assessed and optimised. The influence of the changing mobility demands of the society and the resulting changes to the origination of producer, owner, driver and supplier show aspects for future liability and risk share option for new supply chains. Examples from various industries provide some well-proven engineering principles how to adapt those for the future mobility for the benefit of the users. The aim of the book is to raise awareness that the safety provided by a product, a means of transport or a system up to an entire traffic system depends on the capabilities of the various actors. In addition to the driver and passengers, there are also other road users, maintenance personnel and service providers, who must have certain abilities to act safely in traffic. These are also the capabilities of the organisation, not only the organisation that develops or brings the product to market, but also the organisation that is responsible for the operation and the whole lifecycle of the products. The book is for people who want to get involved in the mobility of the future. People, that have ideas to become a player who want to help shape the future mobility of society and who want to bring responsible solutions for users into the market.