Embedded Sopc Design With Nios Ii Processor And Vhdl Examples

Download or read book Embedded SoPC Design with Nios II Processor and VHDL Examples written by Pong P. Chu and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is divided into four major parts. Part I covers HDL constructs and synthesis of basic digital circuits. Part II provides an overview of embedded software development with the emphasis on low-level I/O access and drivers. Part III demonstrates the design and development of hardware and software for several complex I/O peripherals, including PS2 keyboard and mouse, a graphic video controller, an audio codec, and an SD (secure digital) card. Part IV provides three case studies of the integration of hardware accelerators, including a custom GCD (greatest common divisor) circuit, a Mandelbrot set fractal circuit, and an audio synthesizer based on DDFS (direct digital frequency synthesis) methodology. The book utilizes FPGA devices, Nios II soft-core processor, and development platform from Altera Co., which is one of the two main FPGA manufactures. Altera has a generous university program that provides free software and discounted prototyping boards for educational institutions (details at http://www.altera.com/university). The two main educational prototyping boards are known as DE1 ($99) and DE2 ($269). All experiments can be implemented and tested with these boards. A board combined with this book becomes a “turn-key” solution for the SoPC design experiments and projects. Most HDL and C codes in the book are device independent and can be adapted by other prototyping boards as long as a board has similar I/O configuration.

Download or read book Embedded SoPC Design with Nios II Processor and VHDL Examples written by Pong P. Chu and published by John Wiley & Sons. This book was released on 2011-09-26 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is divided into four major parts. Part I covers HDL constructs and synthesis of basic digital circuits. Part II provides an overview of embedded software development with the emphasis on low-level I/O access and drivers. Part III demonstrates the design and development of hardware and software for several complex I/O peripherals, including PS2 keyboard and mouse, a graphic video controller, an audio codec, and an SD (secure digital) card. Part IV provides three case studies of the integration of hardware accelerators, including a custom GCD (greatest common divisor) circuit, a Mandelbrot set fractal circuit, and an audio synthesizer based on DDFS (direct digital frequency synthesis) methodology. The book utilizes FPGA devices, Nios II soft-core processor, and development platform from Altera Co., which is one of the two main FPGA manufactures. Altera has a generous university program that provides free software and discounted prototyping boards for educational institutions (details at http://www.altera.com/university). The two main educational prototyping boards are known as DE1 ($99) and DE2 ($269). All experiments can be implemented and tested with these boards. A board combined with this book becomes a “turn-key” solution for the SoPC design experiments and projects. Most HDL and C codes in the book are device independent and can be adapted by other prototyping boards as long as a board has similar I/O configuration.

Download or read book Embedded SoPC Design with Nios II Processor and Verilog Examples written by Pong P. Chu and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the unique hardware programmability of FPGA-based embedded systems, using a learn-by-doing approach to introduce the concepts and techniques for embedded SoPC design with Verilog An SoPC (system on a programmable chip) integrates a processor, memory modules, I/O peripherals, and custom hardware accelerators into a single FPGA (field-programmable gate array) device. In addition to the customized software, customized hardware can be developed and incorporated into the embedded system as well allowing us to configure the soft-core processor, create tailored I/O interfaces, and develop specialized hardware accelerators for computation-intensive tasks. Utilizing an Altera FPGA prototyping board and its Nios II soft-core processor, Embedded SoPC Design with Nios II Processor and Verilog Examples takes a "learn by doing" approach to illustrate the hardware and software design and development process by including realistic projects that can be implemented and tested on the board. Emphasizing hardware design and integration throughout, the book is divided into four major parts: Part I covers HDL and synthesis of custom hardware Part II introduces the Nios II processor and provides an overview of embedded software development Part III demonstrates the design and development of hardware and software of several complex I/O peripherals, including a PS2 keyboard and mouse, a graphic video controller, an audio codec, and an SD (secure digital) card Part IV provides several case studies of the integration of hardware accelerators, including a custom GCD (greatest common divisor) circuit, a Mandelbrot set fractal circuit, and an audio synthesizer based on DDFS (direct digital frequency synthesis) methodology While designing and developing an embedded SoPC can be rewarding, the learning can be a long and winding journey. This book shows the trail ahead and guides readers through the initial steps to exploit the full potential of this emerging methodology.

Download or read book Embedded SoPC Design with Nios II Processor and Verilog Examples written by Pong P. Chu and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the unique hardware programmability of FPGA-based embedded systems, using a learn-by-doing approach to introduce the concepts and techniques for embedded SoPC design with Verilog An SoPC (system on a programmable chip) integrates a processor, memory modules, I/O peripherals, and custom hardware accelerators into a single FPGA (field-programmable gate array) device. In addition to the customized software, customized hardware can be developed and incorporated into the embedded system as well allowing us to configure the soft-core processor, create tailored I/O interfaces, and develop specialized hardware accelerators for computation-intensive tasks. Utilizing an Altera FPGA prototyping board and its Nios II soft-core processor, Embedded SoPC Design with Nios II Processor and Verilog Examples takes a "learn by doing" approach to illustrate the hardware and software design and development process by including realistic projects that can be implemented and tested on the board. Emphasizing hardware design and integration throughout, the book is divided into four major parts: Part I covers HDL and synthesis of custom hardware Part II introduces the Nios II processor and provides an overview of embedded software development Part III demonstrates the design and development of hardware and software of several complex I/O peripherals, including a PS2 keyboard and mouse, a graphic video controller, an audio codec, and an SD (secure digital) card Part IV provides several case studies of the integration of hardware accelerators, including a custom GCD (greatest common divisor) circuit, a Mandelbrot set fractal circuit, and an audio synthesizer based on DDFS (direct digital frequency synthesis) methodology While designing and developing an embedded SoPC can be rewarding, the learning can be a long and winding journey. This book shows the trail ahead and guides readers through the initial steps to exploit the full potential of this emerging methodology.

Download or read book FPGA Prototyping by VHDL Examples written by Pong P. Chu and published by John Wiley & Sons. This book was released on 2017-10-12 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on introduction to FPGA prototyping and SoC design This Second Edition of the popular book follows the same “learning-by-doing” approach to teach the fundamentals and practices of VHDL synthesis and FPGA prototyping. It uses a coherent series of examples to demonstrate the process to develop sophisticated digital circuits and IP (intellectual property) cores, integrate them into an SoC (system on a chip) framework, realize the system on an FPGA prototyping board, and verify the hardware and software operation. The examples start with simple gate-level circuits, progress gradually through the RT (register transfer) level modules, and lead to a functional embedded system with custom I/O peripherals and hardware accelerators. Although it is an introductory text, the examples are developed in a rigorous manner, and the derivations follow strict design guidelines and coding practices used for large, complex digital systems. The new edition is completely updated. It presents the hardware design in the SoC context and introduces the hardware-software co-design concept. Instead of treating examples as isolated entities, the book integrates them into a single coherent SoC platform that allows readers to explore both hardware and software “programmability” and develop complex and interesting embedded system projects. The revised edition: Adds four general-purpose IP cores, which are multi-channel PWM (pulse width modulation) controller, I2C controller, SPI controller, and XADC (Xilinx analog-to-digital converter) controller. Introduces a music synthesizer constructed with a DDFS (direct digital frequency synthesis) module and an ADSR (attack-decay-sustain-release) envelop generator. Expands the original video controller into a complete stream-based video subsystem that incorporates a video synchronization circuit, a test pattern generator, an OSD (on-screen display) controller, a sprite generator, and a frame buffer. Introduces basic concepts of software-hardware co-design with Xilinx MicroBlaze MCS soft-core processor. Provides an overview of bus interconnect and interface circuit. Introduces basic embedded system software development. Suggests additional modules and peripherals for interesting and challenging projects. The FPGA Prototyping by VHDL Examples, Second Edition makes a natural companion text for introductory and advanced digital design courses and embedded system course. It also serves as an ideal self-teaching guide for practicing engineers who wish to learn more about this emerging area of interest.

Download or read book FPGA Prototyping by SystemVerilog Examples written by Pong P. Chu and published by John Wiley & Sons. This book was released on 2018-05-30 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on introduction to FPGA prototyping and SoC design This is the successor edition of the popular FPGA Prototyping by Verilog Examples text. It follows the same “learning-by-doing” approach to teach the fundamentals and practices of HDL synthesis and FPGA prototyping. The new edition uses a coherent series of examples to demonstrate the process to develop sophisticated digital circuits and IP (intellectual property) cores, integrate them into an SoC (system on a chip) framework, realize the system on an FPGA prototyping board, and verify the hardware and software operation. The examples start with simple gate-level circuits, progress gradually through the RT (register transfer) level modules, and lead to a functional embedded system with custom I/O peripherals and hardware accelerators. Although it is an introductory text, the examples are developed in a rigorous manner, and the derivations follow the strict design guidelines and coding practices used for large, complex digital systems. The book is completely updated and uses the SystemVerilog language, which “absorbs” the Verilog language. It presents the hardware design in the SoC context and introduces the hardware-software co-design concept. Instead of treating examples as isolated entities, the book integrates them into a single coherent SoC platform that allows readers to explore both hardware and software “programmability” and develop complex and interesting embedded system projects. The new edition: Adds four general-purpose IP cores, which are multi-channel PWM (pulse width modulation) controller, I2C controller, SPI controller, and XADC (Xilinx analog-to-digital converter) controller. Introduces a music synthesizer constructed with a DDFS (direct digital frequency synthesis) module and an ADSR (attack-decay-sustain-release) envelope generator. Expands the original video controller into a complete stream based video subsystem that incorporates a video synchronization circuit, a test-pattern generator, an OSD (on-screen display) controller, a sprite generator, and a frame buffer. Provides a detailed discussion on blocking and nonblocking statements and coding styles. Describes basic concepts of software-hardware co-design with Xilinx MicroBlaze MCS soft-core processor. Provides an overview of bus interconnect and interface circuit. Presents basic embedded system software development. Suggests additional modules and peripherals for interesting and challenging projects. FPGA Prototyping by SystemVerilog Examples makes a natural companion text for introductory and advanced digital design courses and embedded system courses. It also serves as an ideal self-teaching guide for practicing engineers who wish to learn more about this emerging area of interest.

Download or read book A Route to Chaos Using FPGAs written by Bharathwaj Muthuswamy and published by Springer. This book was released on 2015-06-18 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this introductory book is to couple the teaching of chaotic circuit and systems theory with the use of field programmable gate arrays (FPGAs). As such, it differs from other texts on chaos: first, it puts emphasis on combining theoretical methods, simulation tools and physical realization to help the reader gain an intuitive understanding of the properties of chaotic systems. Second, the "medium" used for physical realization is the FPGA. These devices are massively parallel architectures that can be configured to realize a variety of logic functions. Hence, FPGAs can be configured to emulate systems of differential equations. Nevertheless maximizing the capabilities of an FPGA requires the user to understand the underlying hardware and also FPGA design software. This is achieved by the third distinctive feature of this book: a lab component in each chapter. Here, readers are asked to experiment with computer simulations and FPGA designs, to further their understanding of concepts covered in the book. This text is intended for graduate students in science and engineering interested in exploring implementation of nonlinear dynamical (chaotic) systems on FPGAs.