Design And Development Of Radio Frequency Identification Rfid And Rfid Enabled Sensors On Flexible Low Cost Substrates

Download or read book Design and Development of Radio Frequency Identification (RFID) and RFID-enabled Sensors on Flexible Low Cost Substrates written by Li Yang and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step discussion of the design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates for UHF frequency bands. Various examples of fully function building blocks (design and fabrication of antennas, integration with ICs and microcontrollers, power sources, as well as inkjet-printing techniques) demonstrate the revolutionary effect of this approach in low cost RFID and RFID-enabled sensors fields. This approach could be easily extended to other microwave and wireless applications as well. The first chapter describes the basic functionality and the physical and IT-related principles underlying RFID and sensors technology. Chapter two explains in detail inkjet-printing technology providing the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic substrates such as Liquid Crystal Polymer (LCP) or paper-based substrates. Chapter three demonstrates several compact inkjet-printed UHF RFID antennas using antenna matching techniques to match IC's complex impedance as prototypes to provide the proof of concept of this technology. Chapter four discusses the benefits of using conformal magnetic material as a substrate for miniaturized high-frequency circuit applications. In addition, in Chapter five, the authors also touch up the state-of-the-art area of fully-integrated wireless sensor modules on organic substrates and show the first ever 2D sensor integration with an RFID tag module on paper, as well as the possibility of 3D multilayer paper-based RF/microwave structures. Table of Contents: Radio Frequency Identification Introduction / Flexible Organic Low Cost Substrates / Benchmarking RFID Prototypes on Organic Substrates / Conformal Magnetic Composite RFID Tags / Inkjet-Printed RFID-Enabled Sensors

Download or read book Design and Development of RFID and RFID-Enabled Sensors on Flexible Low Cost Substrates written by Li Yang and published by Springer Nature. This book was released on 2022-06-01 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step discussion of the design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates for UHF frequency bands. Various examples of fully function building blocks (design and fabrication of antennas, integration with ICs and microcontrollers, power sources, as well as inkjet-printing techniques) demonstrate the revolutionary effect of this approach in low cost RFID and RFID-enabled sensors fields. This approach could be easily extended to other microwave and wireless applications as well. The first chapter describes the basic functionality and the physical and IT-related principles underlying RFID and sensors technology. Chapter two explains in detail inkjet-printing technology providing the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic substrates such as Liquid Crystal Polymer (LCP) or paper-based substrates. Chapter three demonstrates several compact inkjet-printed UHF RFID antennas using antenna matching techniques to match IC's complex impedance as prototypes to provide the proof of concept of this technology. Chapter four discusses the benefits of using conformal magnetic material as a substrate for miniaturized high-frequency circuit applications. In addition, in Chapter five, the authors also touch up the state-of-the-art area of fully-integrated wireless sensor modules on organic substrates and show the first ever 2D sensor integration with an RFID tag module on paper, as well as the possibility of 3D multilayer paper-based RF/microwave structures. Table of Contents: Radio Frequency Identification Introduction / Flexible Organic Low Cost Substrates / Benchmarking RFID Prototypes on Organic Substrates / Conformal Magnetic Composite RFID Tags / Inkjet-Printed RFID-Enabled Sensors

Download or read book Chipless RFID Sensors written by Nemai Chandra Karmakar and published by John Wiley & Sons. This book was released on 2016-03-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic treatment of the design and fabrication of chipless RFID sensors This book presents various sensing techniques incorporated into chipless RFID systems. The book is divided into five main sections: Introduction to Chipless RFID Sensors; RFID Sensor Design; Smart Materials; Fabrication, Integration and Testing; and Applications of Chipless RFID Sensors. After a comprehensive review of conventional RFID sensors, the book presents various passive microwave circuit designs to achieve compact, high data density and highly sensitive tag sensors for a number of real-world ubiquitous sensing applications. The book reviews the application of smart materials for microwave sensing and provides an overview of various micro- and nano-fabrication techniques with the potential to be used in the development of chipless RFID sensors. The authors also explore a chipless RFID reader design capable of reading data ID and sensory information from the chipless RFID sensors presented in the book. The unique features of the book are: Evaluating new chipless RFID sensor design that allow non-invasive PD detection and localization, real-time environment monitoring, and temperature threshold detection and humidity Providing a classification of smart materials based on sensing physical parameters (i.e. humidity, temperature, pH, gas, strain, light, etc.) Discussing innovative micro- and nano-fabrication processes including printing suitable for chipless RFID sensors Presenting a detailed case study on various real-world applications including retail, pharmaceutical, logistics, power, and construction industries Chipless RFID Sensors is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.

Download or read book Handbook of Flexible and Stretchable Electronics written by Muhammad M. Hussain and published by CRC Press. This book was released on 2019-11-11 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexibility and stretchability of electronics are crucial for next generation electronic devices that involve skin contact sensing and therapeutic actuation. This handbook provides a complete entrée to the field, from solid-state physics to materials chemistry, processing, devices, performance, and reliability testing, and integrated systems development. This work shows how microelectronics, signal processing, and wireless communications in the same circuitry are impacting electronics, healthcare, and energy applications. Key Features: • Covers the fundamentals to device applications, including solid-state and mechanics, chemistry, materials science, characterization techniques, and fabrication; • Offers a comprehensive base of knowledge for moving forward in this field, from foundational research to technology development; • Focuses on processing, characterization, and circuits and systems integration for device applications; • Addresses the basic physical properties and mechanics, as well as the nuts and bolts of reliability and performance analysis; • Discusses various technology applications, from printed electronics to logic and memory devices, sensors, actuators, displays, and energy storage and harvesting. This handbook will serve as the one-stop knowledge base for readership who are interested in flexible and stretchable electronics.

Download or read book Intelligent IoT Systems in Personalized Health Care written by Arun Kumar Sangaiah and published by Academic Press. This book was released on 2020-11-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent IoT Systems in Personalized Health Care delivers a significant forum for the technical advancement of IoMT learning in parallel computing environments across biomedical engineering diversified domains and its applications. Pursuing an interdisciplinary approach, the book focuses on methods used to identify and acquire valid, potentially useful knowledge sources. The book presents novel, in-depth, fundamental research contributions from a methodological/application perspective to help readers understand the fusion of AI with IoT and its capabilities in solving a diverse range of problems for biomedical engineering and its real-world personalized health care applications. The book is well suited for researchers exploring the significance of IoT based architecture to perform predictive analytics of user activities in sustainable health. - Presents novel, in-depth, fundamental research contributions from a methodological/application perspective to help readers understand the fusion of AI with IoT - Illustrates state-of-the-art developments in new theories and applications of IoMT techniques as applied to parallel computing environments in biomedical engineering systems - Presents concepts and technologies successfully used in the implementation of today's intelligent data-centric IoT systems and Edge-Cloud-Big data

Download or read book Handbook of Biomedical Telemetry written by Konstantina S. Nikita and published by John Wiley & Sons. This book was released on 2014-07-28 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-have compendium on biomedical telemetry for all biomedical professional engineers, researchers, and graduate students in the field Handbook of Biomedical Telemetry describes the main components of a typical biomedical telemetry system, as well as its technical challenges. Written by a diverse group of experts in the field, it is filled with overviews, highly-detailed scientific analyses, and example applications of biomedical telemetry. The book also addresses technologies for biomedical sensing and design of biomedical telemetry devices with special emphasis on powering/integration issues and materials for biomedical telemetry applications. Handbook of Biomedical Telemetry: Describes the main components of a typical biomedical telemetry system, along with the technical challenges Discusses issues of spectrum regulations, standards, and interoperability—while major technical challenges related to advanced materials, miniaturization, and biocompatibility issues are also included Covers body area electromagnetics, inductive coupling, antennas for biomedical telemetry, intra-body communications, non-RF communication links for biomedical telemetry (optical biotelemetry), as well as safety issues, human phantoms, and exposure assessment to high-frequency biotelemetry fields Presents biosensor network topologies and standards; context-aware sensing and multi-sensor fusion; security and privacy issues in biomedical telemetry; and the connection between biomedical telemetry and telemedicine Introduces clinical applications of Body Sensor Networks (BSNs) in addition to selected examples of wearable, implantable, ingestible devices, stimulator and integrated mobile healthcare system paradigms for monitoring and therapeutic intervention Covering biomedical telemetry devices, biosensor network topologies and standards, clinical applications, wearable and implantable devices, and the effects on the mobile healthcare system, this compendium is a must-have for professional engineers, researchers, and graduate students.

Download or read book Organic and Printed Electronics written by Giovanni Nisato and published by CRC Press. This book was released on 2024-05-24 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic and printed electronics (OPE) is well established in terms of academic, scientific, and technological research. The mass applications, ranging from displays to printed sensors to photovoltaics, are growing and becoming all the more relevant today. This book provides a comprehensive introduction to organic flexible and printed electronics, their fundamental aspects, core technologies, and applications and is authored by international expert practitioners in the field. The book is a key reference resource specially designed to address students in their final undergraduate or beginning graduate studies as well as engineers interested in approaching this field from an application perspective. In this second edition of the book, almost all chapters have been revised and updated. Among others, the second edition includes new chapters on smart textiles and on photovoltaics. The chapter on characterization techniques has been expanded and includes new references to standards. The contents on circular economy, innovation management, and roadmapping chapters have been largely augmented and updated. Finally, the chapter on hands-on experiments includes new set-ups on dye solar cells and supercapacitors.