Analog Design And Simulation Using Orcad Capture And Pspice

Download or read book Analog Design and Simulation Using OrCAD Capture and PSpice written by Dennis Fitzpatrick and published by Elsevier. This book was released on 2011-11-16 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone involved in circuit design that needs the practical know-how it takes to design a successful circuit or product, will find this practical guide to using Capture-PSpice (written by a former Cadence PSpice expert for Europe) an essential book. The text delivers step-by-step guidance on using Capture-PSpice to help professionals produce reliable, effective designs. Readers will learn how to get up and running quickly and efficiently with industry standard software and in sufficient detail to enable building upon personal experience to avoid common errors and pit-falls. This book is of great benefit to professional electronics design engineers, advanced amateur electronics designers, electronic engineering students and academic staff looking for a book with a real-world design outlook. Provides both a comprehensive user guide, and a detailed overview of simulation Each chapter has worked and ready to try sample designs and provides a wide range of to-do exercises Core skills are developed using a running case study circuit Covers Capture and PSpice together for the first time.

Download or read book Analog Design and Simulation using OrCAD Capture and PSpice written by Dennis Fitzpatrick and published by Elsevier. This book was released on 2011-09-28 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Design and Simulation using OrCAD Capture and PSpice provides step-by-step instructions on how to use the Cadence/OrCAD family of Electronic Design Automation software for analog design and simulation. Organized into 22 chapters, each with exercises at the end, it explains how to start Capture and set up the project type and libraries for PSpice simulation. It also covers the use of AC analysis to calculate the frequency and phase response of a circuit and DC analysis to calculate the circuits bias point over a range of values. The book describes a parametric sweep, which involves sweeping a parameter through a range of values, along with the use of Stimulus Editor to define transient analog and digital sources. It also examines the failure of simulations due to circuit errors and missing or incorrect parameters, and discusses the use of Monte Carlo analysis to estimate the response of a circuit when device model parameters are randomly varied between specified tolerance limits according to a specified statistical distribution. Other chapters focus on the use of worst-case analysis to identify the most critical components that will affect circuit performance, how to add and create PSpice models, and how the frequency-related signal and dispersion losses of transmission lines affect the signal integrity of high-speed signals via the transmission lines. Practitioners, researchers, and those interested in using the Cadence/OrCAD professional simulation software to design and analyze electronic circuits will find the information, methods, compounds, and experiments described in this book extremely useful. - Provides both a comprehensive user guide, and a detailed overview of simulation - Each chapter has worked and ready to try sample designs and provides a wide range of to-do exercises - Core skills are developed using a running case study circuit - Covers Capture and PSpice together for the first time

Download or read book Complete PCB Design Using OrCAD Capture and PCB Editor written by Kraig Mitzner and published by Newnes. This book was released on 2009-05-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Editor. Capture is used to build the schematic diagram of the circuit, and Editor is used to design the circuit board so that it can be manufactured. The book is written for both students and practicing engineers who need in-depth instruction on how to use the software, and who need background knowledge of the PCB design process. - Beginning to end coverage of the printed circuit board design process. Information is presented in the exact order a circuit and PCB are designed - Over 400 full color illustrations, including extensive use of screen shots from the software, allow readers to learn features of the product in the most realistic manner possible - Straightforward, realistic examples present the how and why the designs work, providing a comprehensive toolset for understanding the OrCAD software - Introduces and follows IEEE, IPC, and JEDEC industry standards for PCB design. - Unique chapter on Design for Manufacture covers padstack and footprint design, and component placement, for the design of manufacturable PCB's - FREE CD containing the OrCAD demo version and design files

Download or read book Analog Design and Simulation Using OrCAD Capture and PSpice written by Dennis Fitzpatrick and published by Newnes. This book was released on 2017-12-11 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: New to this edition: Updated to using OrCAD Release 17.2 and its new features; Coverage of PSPICE extra features: PSpice Designer, PSpice Designer Plus, Modelling Application, PSpice Part Search Symbol Viewer, PSpice Report, Associate PSpice model, New delay functions for Behavioural Simulation Models, New Models, Support for negative values in hysteresis voltage and threshold voltage; A new chapter on PSpice Advanced Analysis Analog Design and Simulation Using OrCAD Capture and PSpice, Second Edition provides step-by-step instructions on how to use the Cadence/OrCAD family of Electronic Design Automation software for analog design and simulation. The book explains how to enter schematics in Capture, set up project types, project libraries and prepare circuits for PSpice simulation. There are chapters on the different analysis types for DC Bias point, DC sweep, AC frequency sweep, Parametric analysis, Temperature analysis, Performance Analysis, Noise analysis, Sensitivity and Monte Carlo simulation. Subsequent chapters explain how the Stimulus Editor is used to define custom analog and digital signals, how the Model Editor is used to view and create new PSpice models and Capture parts and how the Magnetic Parts Editor is used to design transformers and inductors. Other chapters include Analog Behaviorial models, Test Benches as well as how to create hierarchical designs. The book includes the latest features in the OrCAD 17.2 release and there are exercises with step by step instructions at the end of each chapter that enables the reader to progress based upon their experience and knowledge gained from previous chapters. The author worked for Cadence for over eight years and supported and delivered OrCAD PSpice training courses all over Europe. This book has been endorsed by Cadence. In addition, there are new chapters on the PSpice Advanced Analysis suite of tools: Sensitivity Analysis, Optimizer, Monte Carlo, and Smoke Analysis.The chapters show how circuit performance can effectively be maximised and optimised for variations in component tolerances, temperature effects, manufacturing yields and component stress. - Provides both a comprehensive user guide and a detailed overview of simulation using OrCAD Capture and PSpice - Includes worked and ready to try sample designs and a wide range of to-do exercises - Covers Capture and PSpice together

Download or read book Complete PCB Design Using OrCad Capture and Layout written by Kraig Mitzner and published by Elsevier. This book was released on 2011-04-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete PCB Design Using OrCad Capture and Layout provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The book is written for both students and practicing engineers who need a quick tutorial on how to use the software and who need in-depth knowledge of the capabilities and limitations of the software package. There are two goals the book aims to reach: The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Layout. Capture is used to build the schematic diagram of the circuit, and Layout is used to design the circuit board so that it can be manufactured. The secondary goal is to show the reader how to add PSpice simulation capabilities to the design, and how to develop custom schematic parts, footprints and PSpice models. Often times separate designs are produced for documentation, simulation and board fabrication. This book shows how to perform all three functions from the same schematic design. This approach saves time and money and ensures continuity between the design and the manufactured product. - Information is presented in the exact order a circuit and PCB are designed - Straightforward, realistic examples present the how and why the designs work, providing a comprehensive toolset for understanding the OrCAD software - Introduction to the IPC, JEDEC, and IEEE standards relating to PCB design - Full-color interior and extensive illustrations allow readers to learn features of the product in the most realistic manner possible

Download or read book PSpice for Digital Communications Engineering written by Paul Tobin and published by Morgan & Claypool Publishers. This book was released on 2007 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: PSpice for Digital Communications Engineering shows how to simulate digital communication systems and modulation methods using the very powerful Cadence Orcad PSpice version 10.5 suite of software programs. Fourier series and Fourier transform are applied to signals to set the ground work for the modulation techniques introduced in later chapters. Various baseband signals, including duo-binary baseband signaling, are generated and the spectra are examined to detail the unsuitability of these signals for accessing the public switched network. Pulse code modulation and time-division multiplexing circuits are examined and simulated where sampling and quantization noise topics are discussed. We construct a single-channel PCM system from transmission to receiver i.e. end-to-end, and import real speech signals to examine the problems associated with aliasing, sample and hold.Companding is addressed here and we look at the A and mu law characteristics for achieving better signal to quantization noise ratios. Several types of delta modulators are examined and also the concept of time divisionmultiplexing is considered. Multi-level signaling techniques such as QPSK andQAMare analyzed and simulated and 'home-made meters', such as scatter and eye meters, are used to assess the performance of these modulation systems in the presence of noise. The raised-cosine family of filters for shaping data before transmission is examined in depth where bandwidth efficiency and channel capacity is discussed. We plot several graphs in Probe to compare the efficiency of these systems. Direct spread spectrum is the last topic to be examined and simulated to show the advantages of spreading the signal over a wide bandwidth and giving good signal security at the same time.

Download or read book PSpice for Circuit Theory and Electronic Devices written by Paul Tobin and published by Springer Nature. This book was released on 2022-05-31 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: PSpice for Circuit Theory and Electronic Devices is one of a series of five PSpice books and introduces the latest Cadence Orcad PSpice version 10.5 by simulating a range of DC and AC exercises. It is aimed primarily at those wishing to get up to speed with this version but will be of use to high school students, undergraduate students, and of course, lecturers. Circuit theorems are applied to a range of circuits and the calculations by hand after analysis are then compared to the simulated results. The Laplace transform and the s-plane are used to analyze CR and LR circuits where transient signals are involved. Here, the Probe output graphs demonstrate what a great learning tool PSpice is by providing the reader with a visual verification of any theoretical calculations. Series and parallel-tuned resonant circuits are investigated where the difficult concepts of dynamic impedance and selectivity are best understood by sweeping different circuit parameters through a range of values. Obtaining semiconductor device characteristics as a laboratory exercise has fallen out of favour of late, but nevertheless, is still a useful exercise for understanding or modelling semiconductor devices. Inverting and non-inverting operational amplifiers characteristics such as gain-bandwidth are investigated and we will see the dependency of bandwidth on the gain using the performance analysis facility. Power amplifiers are examined where PSpice/Probe demonstrates very nicely the problems of cross-over distortion and other problems associated with power transistors. We examine power supplies and the problems of regulation, ground bounce, and power factor correction. Lastly, we look at MOSFET device characteristics and show how these devices are used to form basic CMOS logic gates such as NAND and NOR gates.