An Introduction To Autodesk Inventor 2010 And Autocad 2010

Download or read book An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 written by Randy H. Shih and published by SDC Publications. This book was released on 2010 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most schools using Autodesk software first introduce students to the 2D features of AutoCAD and then go on to its 3D Capabilities. Inventor is usually reserved for the second or third course or for a solid modeling course. However, another possibility is to introduce students first to solid modeling using Inventor and then to introduce AutoCAD as a 2D product. Students learn to create solid models using Inventor and then learn how to create working drawings of their 3D models using AutoCAD. This approach provides students with a strong understanding of the process used to create models and drawing in the industry. This book contains a series of tutorial style lessons designed to introduce Autodesk Inventor, AutoCAD, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, creating multi-view drawings and assembly models. Introduction to Inventor2011 and AutoCAD 2011 consists of ten chapters from Parametric Modeling using Inventor 2011 and six chapters from AutoCAD 20110 Tutorial-First Level: 2D Fundamentals. This book is available only as a three hole punch book for use in a spiral binder. This book is used by Ohio State in their freshman engineering program.

Download or read book An Introduction to Autodesk Inventor 2010 and AutoCAD 2010 written by Randy Shih and published by SDC Publications. This book was released on 2009-09 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most schools using Autodesk software first introduce students to the 2D features of AutoCAD and then go on to its 3D Capabilities. Inventor is usually reserved for the second or third course or for a solid modeling course. However, another possibility is to introduce students first to solid modeling using Inventor and then to introduce AutoCAD as a 2D product. Students learn to create solid models using Inventor and then learn how to create working drawings of their 3D models using AutoCAD. This approach provides students with a strong understanding of the process used to create models and drawing in the industry. This book contains a series of tutorial style lessons designed to introduce Autodesk Inventor, AutoCAD, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, creating multi-view drawings and assembly models. Introduction to Inventor/AutoCAD 2010 consists of ten chapters from Parametric Modeling using Inventor 2010 and six chapters from AutoCAD 2010 Tutorial-First Level: 2D Fundamentals. This book is available only as a three hole punch book for use in a spiral binder. This book is used by Ohio State in their freshman engineering program.

Download or read book Introduction to AutoCAD 2010 for Civil Engineering Applications written by Nighat Yasmin and published by SDC Publications. This book was released on 2010-07-27 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to provide civil engineering students with a clear presentation of the theory of engineering graphics and the use of AutoCAD 2010. Each chapter starts with the chapter objectives followed by the introduction. The contents of each chapter are organized into well-defined sections that contain step-by-step instructions to carry out the AutoCAD commands. The drawings shown in this book are created using AutoCAD 2010 and Paint software. This edition includes several notable improvements. Three new chapters have been added and one of the chapters from the 2008 edition has been partitioned into two chapters. The most important addition is chapter 18 entitled: Suggested Lab. This chapter provides in-class activities (or labs). This book has bee categorized and ordered into seven parts: Introduction to AutoCAD 2010 Use of AutoCAD in land survey data plotting The use of AutoCAD in hydrology Transportation engineering and AutoCAD AutoCAD and architecture technology Introduction to working drawing Suggested drawing problems

Download or read book Up and Running with Autodesk Inventor Simulation 2010 written by Wasim Younis and published by Butterworth-Heinemann. This book was released on 2009-05-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inventor Simulation is an essential part of the Autodesk Digital Prototyping process. It allows engineers and designers to explore and test components and products virtually, visualizing and simulating real-world performance. Up and Running with Autodesk Inventor Simulation 2010 is dedicated to the requirements of Inventor users who need to quickly learn or refresh their skills, and apply the dynamic simulation, assembly analysis and optimization capabilities of Inventor Simulation 2010. - Step-by-step approach gets you up and running fast - Discover how to convert CAD models to working digital prototypes, enabling you to enhance designs, reduce over design, failure, and the need to create physical prototypes - Extensive real-world design problems explore all the new and key features of the 2010 software, including assembly stress analysis; parametric optimization analysis; creating joints effectively; avoiding redundant joints; unknown force; logic conditions; and more... - Tips and guidance you to tackle your own design challenges with confidence

Download or read book AutoCAD 2007 Tutorial written by Randy H. Shih and published by . This book was released on 2006 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook contains a series of ten tutorial style lessons designed to introduce students to AutoCAD 2007. The new improvements and key enhancements of the software are incorporated into the lessons. Students will learn to use the AutoCAD Heads-up DesignTM interface, which means the students will learn to focus on the design, not on the keyboard. Table of Contents Introduction Getting Started 1. AutoCAD Fundamentals 2. Basic Object Construction Tools 3. Geometric Construction and Editing Tools 4. Object Properties and Organization 5. Orthographic Views in Multiview Drawings 6. Basic Dimensioning and Notes 7. Templates and Plotting 8. Auxiliary Views and Editing with GRIPS 9. Section Views 10. Assembly Drawings and Blocks

Download or read book Residential Design Using AutoCAD 2013 written by Daniel John Stine and published by SDC Publications. This book was released on 2012-04-27 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential Design Using AutoCAD 2013 is an introductory level tutorial which uses residential design exercises as the means to teach you AutoCAD 2013. Each book comes with a DVD containing numerous video presentations in which the author shows and explains the many tools and techniques used in AutoCAD 2013. After completing this book you will have a well-rounded knowledge of Computer Aided Drafting that can be used in the industry and the satisfaction of having completed a set of residential drawings. This textbook starts with an optional section that covers basic hand sketching techniques and concepts intended to increase your ability to sketch design ideas by hand and to think three-dimensionally. The book then proceeds with a basic introduction to AutoCAD 2013. The first three chapters are intended to get you familiar with the user interface and many of the common menus and tools. Throughout the rest of the book you will design a residence through to its completion. Using step-by-step tutorial lessons, the residential project is followed through to create elevations, sections, details, etc. Throughout the project, new AutoCAD commands are covered at the appropriate time. Focus is placed on the most essential parts of a command rather than an exhaustive review of every sub-feature of a particular command. The Appendix contains a bonus section covering the fundamental principles of engineering graphics that relate to architecture.

Download or read book Autocad 2014 Tutorial - Second Level written by Randy Shih and published by SDC Publications. This book was released on 2013 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of AutoCAD 2014 Tutorial - Second Level: 3D Modeling is to introduce the aspects of computer based three dimensional modeling. This text is intended to be used as a training guide for both students and professionals. The chapters in this book cover AutoCAD 2014 and proceed in a pedagogical fashion to guide you from constructing 3D wire frame models, 3D surface models, and 3D solid models to making multiview drawings and rendering images. The text takes a hands-on, exercise-intensive approach to all the important 3D modeling techniques and concepts. This book contains a series of twelve tutorial style chapters designed to introduce CAD users to 3D modeling with AutoCAD 2014. Users upgrading from a previous release of the AutoCAD software will also find this text helpful. The basic premise of this book is that the more 3D designs you create using AutoCAD 2014 the better you learn the software. With this in mind each tutorial introduces a new set of commands and concepts, building on previous chapters. By going through this book readers will establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.