Risk Management Of Water Supply And Sanitation Systems

Download or read book Risk Management of Water Supply and Sanitation Systems written by Petr Hlavinek and published by Springer Science & Business Media. This book was released on 2009-04-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each year more than 200 million people are affected by floods, tropical storms, droughts, earthquakes, and also operational failures, wars, terrorism, vandalism, and accidents involving hazardous materials. These are part of the wide variety of events that cause death, injury, and significant economic losses for the countries affected. In an environment where natural hazards are present, local actions are decisive in all stages of risk management: in the work of prevention and mitigation, in rehabilitation and reconstruction, and above all in emergency response and the provision of basic services to the affected population. Commitment to systematic vulnerability reduction is crucial to ensure the resilience of communities and populations to the impact of natural and manmade hazards. Current challenges for the water and sanitation sector require an increase in sustainable access to water and sanitation services in residential areas, where natural hazards pose the greatest risk. In settlements located on unstable and risk-prone land there is growing environmental degradation coupled with extreme conditions of poverty that increase vulnerability. The development of local capacity and risk management play vital roles in obtaining sustainability of water and sanitation systems as well as for the communities themselves. Unfortunately water may also represent a potential target for terrorist activity or war conflict and a deliberate contamination of water is a potential public health threat. An approach which considers the needs of communities and institutions is particularly important in urban areas affected by armed conflict. Risk management for large rehabilitation projects has to deal with major changes caused by conflict: damaged or destroyed infrastructure, increased population, corrupt or inefficient water utilities, and impoverished communities. Water supply and sanitation are amongst the first considerations in disaster response. The greatest water-borne risk to health in most emergencies is the transmission of faecal pathogens, due to inadequate sanitation, hygiene and protection of water sources. However, some disasters, including those involving damage to chemical and nuclear industrial installations, or involving volcanic activity, may create acute problems from chemical or radiological water pollution. Sanitation includes safe excreta disposal, drainage of wastewater and rainwater, solid waste disposal and vector control. This book is based on the discussions and papers prepared for the NATO Advanced Research Workshop that took place in Ohrid, Macedonia under the auspices of the NATO Security Through Science Programme and addressed problems Risk management of water supply and sanitation systems impaired by operational failures, natural disasters and war conflicts. The main purpose of the workshop was to critically assess the existing knowledge on Risk management of water supply and sanitation systems, with respect to diverse conditions in participating countries, and promote close co-operation among scientists with different professional experience from different countries. The ARW technical program comprised papers on 4 topics, : (a) Vulnerability of Wastewater and Sanitation Systems, (b) Vulnerability of Drinking Water Systems, (c) Emergency response plans, and (d) Case studies from regions affected by Drinking Water System, Wastewater and Sanitation System failures.

Download or read book Risk Management for Water and Wastewater Utilities written by Simon Pollard and published by IWA Publishing. This book was released on 2016-05-15 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water risks and security are a major global hazard in the 21st century and it is essential that water professionals have a solid grounding in the principles of preventative risk management. This second edition of the key textbook, Risk Management for Water and Wastewater Utilities, extends beyond first principles and examines the practicalities of resilience and vulnerability assessment, strategic risk appraisal and the interconnectedness of water utility risks in a networked infrastructure. It provides an up-dated overview of tools and techniques for risk management in the context of the heightened expectations for sound risk governance that are being made of all water and wastewater utilities. Risk Management for Water and Wastewater Utilities provides a valuable starting point for newly appointed risk managers in the utility sector and offers MSc level self-paced study with self-assessment questions and abbreviated answers, key learning points, case studies and worked examples.

Download or read book Water Safety Plan Manual written by World Health Organization and published by World Health Organization. This book was released on 2009 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2004, the WHO Guidelines for Drinking Water Quality recommended that water suppliers develop and implement "Water Safety Plans" (WSPs) in order to systematically assess and manage risks. Since this time, governments and regulators, water suppliers and practitioners have increasingly embraced this approach, but they have also requested further guidance. This much-anticipated workbook answers this call by describing how to develop and implement a WSP in clear and practical terms. Stepwise advice is provided through 11 learning modules, each representing a key step in the WSP development and implementation process: 1. Assemble the WSP team; 2. Describe the water supply system; 3. Identify hazards and hazardous events and assess the risks; 4. Determine and validate control measures, reassess and prioritise the risks; 5. Develop, implement and maintain an improvement/upgrade plan; 6. Define monitoring of the control measures; 7. Verify the effectiveness of the WSP; 8. Prepare management procedures; 9. Develop supporting programmes; 10. Plan and carry out periodic review of the WSP; 11. Revise the WSP following an incident ; Every Module is divided into three sections: 'Overview', 'Examples and Tools', and 'Case studies'. The overview section provides a brief introduction to the Module, including why it is important and how it fits into the overall WSP development and implementation process. It outlines key activities that should be carried out, lists typical challenges that may be encountered, and summarizes the essential outputs to be produced. The examples and tools section provides resources which could be adapted to support the development and implementation of WSPs. These resources include example tables and checklists, template forms, diagrams, or practical tips to help a WSP team address specific challenges. These are often example outputs and methodologies adapted from recent WSP experiences. Each Module concludes with case studies so the reader can benefit from lessons-learned from real-life experiences. They are intended to make WSP concepts more concrete and to help readers anticipate issues and challenges that may arise. The descriptions were drawn from WSP initiatives in Australia, the Latin American and the Caribbean region (LAC), and the United Kingdom.

Download or read book Chemical Safety of Drinking-water written by Terrence Thompson and published by WHO. This book was released on 2007 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination of drinking-water is a significant concern for public health throughout the world. Microbial hazards make the largest contribution to waterborne disease in developed and developing countries. Nevertheless, chemicals in water supplies can cause serious health problems--whether the chemicals are naturally occurring or derive from sources of pollution. At a global scale, fluoride and arsenic are the most significant chemicals, each affecting perhaps millions of people. However, many other chemicals can be important contaminants of drinking-water under specific local conditions. Often, identification and assessment of risks to health from drinking-water relies excessively on analysis of water samples. The limitations of this approach are well recognized, and contributed to the delay in recognizing arsenic in drinking-water as a significant health concern in Bangladesh and elsewhere. To overcome such limitations, the latest edition of the World Health Organization (WHO) Guidelines for Drinking-water Quality (WHO, 2004; WHO,2006) emphasizes effective preventive management through a 'framework for drinking-water safety' that incorporates 'water safety plans.' Effective preventive management of chemicals in drinking-water requires simple tools for distinguishing the few chemicals of potential local or national concern from the unmanageably long list of chemicals of possible significance. The aim is to identify and prioritize the chemicals of concern, to overcome the limitations of direct analysis of water quality, and ensure that limited resources are allocated towards the monitoring, assessment and control of the chemicals that pose the greatest health risks. Identifying and prioritizing chemical risks presents a challenge, especially in developing countries, because information on the presence of chemicals in water supplies is often lacking. This document provides guidance to help readers to meet that challenge. It shows how information on aspects such as geology and industrial and agricultural development, which is often readily available, can be used to identify potential chemical contaminants (and potential sources of chemicals), from catchment to consumer, and thus prioritize risks. As a supporting document to the Guidelines for Drinking-water Quality (WHO, 2004; WHO, 2006), this publication is aimed at policy-makers, regulators, managers and public health practitioners at national and local level. It is divided into three parts: Part A provides general guidance on using limited information in prioritizing chemicals in drinking-water for risk management. The need for such guidance is outlined in Chapter 1,which also describes the administrative and policy context. Chapter 2 describes the principles applied in prioritizing chemicals, provides information on some factors that affect chemical concentrations along pathways, and highlights several specific chemicals that are frequently considered priorities because of their widespread occurrence or significant health effects. Chapter 3 discusses the role of drinking-water standards and guidelines, and provides an overview of contemporary water quality management procedures. Part B provides practical guidance on identifying specific chemicals that are likely to be of concern in individual water supply systems. It groups chemical contaminants into five categories on the basis of their potential sources: naturally occurring, from agriculture activities, from human settlements, from industrial activities, and from water treatment and distribution processes themselves. Part C comprises the appendices. It includes guidance on the most likely sources of potential contaminants and on identifying chemicals that could be of concern in particular circumstances. The appendices address potential sources of chemicals considered in the WHO drinking-water guidelines (WHO, 2004; WHO, 2006), chemicals potentially discharged in effluents from industrial sources, and the association of pesticides with crops and crop types. This information is presented in an accessible format that will help users to determine the chemical hazards that can arise in the catchment, in treatment and in distribution, in large, medium and small water supplies. Many experts worldwide contributed to this work over a period of several years, beginning with the 1st Meeting of Experts on Monitoring Chemicals in Drinking Water, held in Bangkok, Thailand, in January 2001. This was followed by the 2nd Meeting of Experts on Monitoring Chemicals in Drinking Water, also held in Bangkok, in December 2001. Both meetings were sponsored by WHO and hosted by the Department of Health, Ministry of Public Health, Thailand. The draft guidance document was subsequently tested in a series of field trials in 2002-2003 in Indonesia, Fiji, Nepal, Mongolia, the Philippines and Thailand. Lessons learnt through the field trials provided feedback that was valuable in revising and finalizing the document. Readers should note that while this publication has been developed as a supporting document for, and with reference to, the Guidelines for Drinking-water Quality, the guidelines themselves are frequently updated and the latest information should always be sought by reference to relevant World Health Organization publications and web site. (http://www.who.int/water_sanitation_health/dwq/guidelines/en/index.html).

Download or read book Sanitation Safety Planning written by World Health Organization and published by World Health Organization. This book was released on 2015-08-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Sanitation Safety Planning (SSP) is a step-by-step risk based approach to assist in the implementation of the 2006 WHO Guidelines for Safe Use of Wastewater, Excreta and Greywater in Agriculture and Aquaculture. The approach can be applied to all sanitary systems to ensure the system is managed to meet health objectives. SSP assists users to: systematically identify and manage health risk along the sanitation chain; guide investment based on actual risks, to promote health benefits and minimize adverse health impacts; provide assurance to authorities and the public on the safety of sanitation-related products and services. The SSP manual is targeted at a variety of users at different levels including; health authorities and regulators, local authorities, wastewater utility managers, sanitation enterprises and farmers, community based organizations, farmers associations and NGOs. SSP brings together actors from different sectors to identify health risks in the sanitation system and agree on improvements and regular monitoring and underscores the leadership role of the health sector."--Publisher's description.

Download or read book Security of Water Supply Systems: from Source to Tap written by Jaroslav Pollert and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reality of the post-September 11 situation forces the operators of water supply systems through the world to examine the security and safety of their systems, its vulnerability to intentional interference and sabotage with respect to quantity and quality of potable water. In assessing system vulnerability, there is an urgent need to develop emergency response plans providing ways and means for alternative water supply at the moment of system operation disruption, and system remediation and recovery after the attack. Security of Water Supply Systems: from Source to Tap presents the state-of-the art with a view to the future, conclusions from past experiences are highlighted and future developments are suggested in the field of drinking water safety.

Download or read book Drinking Water Distribution Systems written by National Research Council and published by National Academies Press. This book was released on 2006-12-22 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.